 |
|
|
| Product Name: |
DeepSeal Natural |
| Issue Date: |
May 2008 |
Not Classified as Hazardous according to criteria of NOHSC
|
|
| COMPANY DETAILS |
| Company Name: |
Know-How Waterproofing Pty Ltd (ABN 14 101 886 051)
Address P.O Box 775 Archerfield QLD 4108
Tel/Fax 07 - 32741000 / 07 - 32741006 |
|
|
| IDENTIFICATION |
| |
| Product Name |
DeepSeal Waterproofing HD |
| Shipping name |
DEEPSEAL Natural “S” |
| UN Number |
1307 |
| Dangerous goods |
IMO Class 3.3 Class 3 |
| Packing group |
None allocated |
| Haz-chem Code |
3YE |
| Poisons Schedule |
IMO First Aid Guide Number 310 |
| Product Use |
Concrete and masonry preserver. |
|
|
|
| HAZARDOUS INGREDIENTS |
| |
Name |
CAS |
Properties |
| |
Siloxane |
1330-20.7 |
Low |
| |
Hydrocarbon solvent |
|
High (60%) |
| |
|
|
|
| |
|
|
|
|
| |
| |
| PYSICAL DATA |
| |
| Appearance and odour |
Colourless liquid (may be coloured with inert pigments) |
| Melting Point |
Not available |
| Boiling point |
138 to 144 C |
| Vapour Pressure |
[mm of Hg at 25 c]: 10 |
| Specific Gravity |
0.9 |
| Solubility in Water |
Dispersible |
|
|
| FIRE AND EXPLOSION HAZARD DATA |
| |
| Flash Point |
24 c – Closed Up |
| Flammability Limits (%VOL) |
0.6 to 7 |
| Fire Extinguisher Media |
Flammable liquid, Vapour may form explosive
mixtures with air. Do not smoke. |
| Special Fire Fighting Procedures |
Call fire brigade. Use vapourising liquid, dry
Chemical, carbon dioxide or alcohol form
Extinguisher. Prevent run off entering drain. |
| Unusual Fire and Explosion Hazards |
Vapour may ignite on pumping or pouring due
To static electricity. Keep away from sources of ignition. |
| Hazardous Products of Combustion |
|
|
|
| HEALTH HAZARD DATA |
| |
| Threshold limit value |
TLV 435 MG/M3 |
| Effects of over-exposure |
|
|
Acute
|
|
|
Chronic
|
|
| |
|
| Emergency and first aid data |
|
| Eyes and skin |
Hold eye open and immediately wash with
Running water for 15 minutes. Remove all contaminated
Clothing including footwear. Wash affected areas with water and if available, soap. |
| Inhalation |
Remove patient to fresh air and rest. If not breathing clear airway and apply artificial respiration. Keep warm and transport to doctor or hospital. |
| Advice to Doctor |
Treat symptomatically |
|
|
REACTIVITY DATA
|
| |
Stability; (Conditions to avoid)
|
Keep containers tightly sealed. Keep wway from heat or sources of ignition
Do not store in pits or basements where vapour may collect. |
| During transport |
|
| Handling and Storage |
|
| Hazardous Decomposition Products |
|
|
|
| SPILL OR LEAK PROCEDURES |
| |
| If Material is Released or Spilled |
Keep all sources of ignition away.
Avoid contact with eyes.Wear PVC Gloves, goggles and suitable respirator or air supplied helmet. Do not allow spills to enter drains or sewers. notify police if this occurs. Absorb spills with Vermiculite, sand or earth. Seal absorbed materials in labelled drums and consult local Waste Authority. |
|
|
| PERSONAL PROTECTION INFORMATION |
| |
| Respiratory Protection |
Provide ventilation sufficient to maintain low level of vapour in workplace or storage area. Keep all doors and
windows open and use forced ventilation to extract vapour from confined spaces. Respiration required if not well ventilated. |
| Skin and eye protection |
Wear PVC gloves and goggles.
Observe good industrial hygiene. |
|
|
|
| Every endeavour has been made to ensure that the information contained in this publication is reliable, but we shall not be liable for any inaccuracy in the information or for any loss, injury or damage whatsoever or however arising which may result from its use. |
| |
|
End of MSDS
|
|
