REQUIREMENT:
High gloss protection of concrete, paving,
masonry and warehouse storage areas against concrete dusting and the
penetration of water and staining substances, whilst enhancing the natural
colours of the surface.
HOW TO SPECIFY:
All exposed surfaces shall be treated by 2
coats of DeepSeal 50. The application rate varies with different materials,
however usage rate per coat for most surfaces range from 1 Litre = 4m2 for
porous surfaces to 7m2 for more dense materials. All surfaces to be clean and
dry, and concrete to be 21 days of age before application of material.
HOW TO USE PRODUCT:
Apply two even coats of DeepSeal ArmourGlaze
to surface with a brush, roller, lambs wool applicator or low-pressure spray.
Allow to dry sufficiently before application of second coat.
EFFECTS:
Being a unique combination of 100% UV stable
Acrylic-glazing liquids, surfaces treated demonstrate a significant increase
against abrasion. Coupled with a high repellency against oils, mild food acids
and water, this gives ideal cost effective protection. DeepSeal Armourglaze
produces a ‘wetted’ effect, which is ideal for areas such as exposed aggregate,
polished concrete and other masonry materials.
WHERE RECOMMENDED:
All natural unpainted masonry, concrete and pressed
clay surfaces.
CLEAN UP:
All tools and equipment should be cleaned
thoroughly with acrylic lacquer thinners, or discarded.
CAUTION:
Any excess material should be mopped up from
surface and not allowed to pond and dry.
SERVICE LIFE:
DeepSeal Natural will give many years of protection;
however life expectancy will depend on the surface and environment in which it
is placed.
HANDLING PROCEDURES:
This material contains class 3 hydrocarbon solvents,
contact with skin and eyes should be avoided. Should not be inhaled or
consumed. Should contact occur, flush thoroughly with clean water and refer to
the manufactures MSDS.
|
